Frequently Asked Questions


Tell me about yourself.

This is the first question you could be asked in any interview. This may sound simple but if you are unprepared you could be in big problem. So just prepare yourself for this simple yet difficult question Start with one two lines about yourself, who you are ? a brief 1 line about your family [ this depends on what kind of interview you are going through] and lastly why are you the best suited person for this job. Tell about your achievements but never sound too proud of your achievements, highlight yourself but with decency. Remember the golden rule
“First Impression is the last impression.”

What are your greatest strengths?

This question is to judge how you present yourself, are you the person who talks too much, are you arrogant or are you the one who just do what others say and thus never realized your strengths.

The answer to this question should be linked with facts and figures if possible. If you had any previous achievements say you lead a team which did wonderful and thus you are a team leader and all. Highlight yourself, tell your strengths but be sure it is well supported and you just don’t start sayings just to impress. Remember the HR person will grill you if he even finds an iota of doubt in what you are saying. Some points on which you could support your answer could be – honesty, leadership, tech savvy, confident, good communication skills, positive attitude, motivational and inspirational leader etc.

So just prepare yourself for this question, make a mental note of all your achievements.

What are your greatest weaknesses?

Now this is the question which could either end your interview or could just get you the job. Don’t mince with words, at the same time just don’t be too blunt. Tell your weakness but also tell what you are doing to over come it. Never say I can not do this. Instead say, I have never done this but I am eager to learn and am sure if our company needs it I will do it.

Note – Never say your company or what would be my position in your company, use our company. Some HR people might ask you why you are saying our before selection then do say – its because I am confident that I am the best person for this vacancy.

Tell me about something you did – or failed to do – that you now feel a little ashamed of.

This question is just to see how you react to embarrassing situations. Of course you just can not say “SKIP THIS PLEASE.” So better prepare yourself. Take your time to reply to this one, at first say I am really finding it very hard to find any such situation as I believe the best way to avoid shame is never do such things.

Most of the interviewers just will proceed to another question but if he or she insists to elaborate then give any appropriate reply but be sure it should not sound that you are so regretful that it still has a mental impact on you. Remember Life must go on….no matter what

Why are you leaving (or did you leave) this position?

By asking this question, the interviewer just wishes to see how much respect you give to your management, colleagues etc. So never say bad words about any of your earlier employers or management. Remember – Never talk bad about any one even if he or she has been the worst boss.

There can be two situation –

First is when you already have one job – In this situation tell truthfully that you see a bright future or this work profile suits you more than current one or so. Never say – I am joining you because you pay more. If you say so, 99% chances are you would be thrown out of interview.

0

Secondly when you are a fresher or you don’t have any job

If you have been fired, then tell them why you were fired, what you have learnt from that incident and what are you doing to make sure this would never happen again in life. Don’t hide the facts, companies do check each and every individual so even if you don’t tell them, they know it.

If you are a fresher then you just say I am fresher and you are done with this question

Why should I hire you?

The most commonly asked question but the question which is most difficult to answer. Before you enter any interview make sure you have read about the company, job profile and all. As soon as this question is asked, start matching your personality traits with the job requirements. Show how you are the best suited person for this job.

For example – If you are going for a job which involves marketing, then convince the interview that you have a personality which is best suited for this job.

The bottom line is – Match yourself with what the job profile is and thus the interviewer should feel that you are the best person for the job.

Where do you see yourself five years from now?

This question is usually asked to see how much ambitious you are and what is your actual reason for joining the company. If you say I see myself as one of the richest manager in town – forget about the job and leave. You need to show that you are a person with focused aims and you are willing to work to fulfill your dreams. Don’t be over ambitious and say I want to be in board of directors in next 5 years. Of course that is not possible unless lady luck stays with you 24*7 for all 5 years.

During an interview I said – I want to see me at your post and you in top management and believe me, the interviewer had a very good laugh and said that was really clever. I don’t suggest you to say this every time but yes if you feel the person has a jolly nature you can say so

Why do you want to work at our company?

This question is asked to check whether you know about the company and work profile or it was just that you got a call from your friend and you walked in the interview.

So do your homework and check annual reports of company, browse website or any relevant data. See the areas where company is growing and match your skills with it. Show the interviewer how you could add to the overall profit of company.

What are your hobbies?

This question is asked to judge your personality. I have seen hundreds of resume which say –Hobbies – reading books, listening songs, browsing internet , sleeping.

For god sake don’t copy it from other’s resume and use it. Write what you actually do. Don’t write I have a hobby of reading books when you could not even name 1 book if asked for. Never be fake, tell them truthfully what you do.

Mention some hobbies which are directly or indirectly linked with job. But make sure you have that hobby. If not then say what you actually do. Different people have different hobbies, so there is nothing to be ashamed off.

What are the causes of building collapse?

The Passage of time is one reason. Buildings also collapse due to weak foundations. Earthquakes, hurricanes and other natural disasters can also damage the structure of the buildings and cause it to collapse. Bombings or demolition of buildings is also other reasons.

What are the applications of modulus of elasticity?

As the term implies, Modulus of Elasticity relates to the elasticity or flexibility of a material. The value of modulus of elasticity is very much significant relating to deflection of certain materials used in the construction industry. Take for example the general E value of mild carbon steel is about 200 GPA comPAred to about 70 GPA for aluminum. This simply translate that aluminum is 3 times flexible than steel.

What is the difference between routing maintenance and major maintenance in school facilities?

The routine maintenance is the minor and consistent repairs that are engaged in the school premises. Examples could include PAinting, replacement of fixtures, louver blades, furniture repairs, and Patching cracks in the school buildings.

How are freeway bridges built?

After calculating the anticiPAted traffic for the bridge, cement/reinforced- with- rebar stanchions are sPAced over the freeway to accommodate the bridge. An 'off-ramp' from the freeway to the bridge is constructed, as is an 'on-ramp' to the subsequent road. Cement/rebar slabs are built and lifted with cranes to form the platform, and voila! Drive carefully.

Although the bridge deck/roadway is almost always a concrete slab, the structure that holds up the bridge deck can be reinforced concrete, structural steel, or a combination of steel and concrete.

How do you measure concrete?

Cubic feet, Cubic yards, Cubic Meter

Which is stronger solid steel rod or hollow steel pipe?

On a per pound basis, steel pipe is stronger in bending and is less likely to buckle in axial compression.


Give a Missed Call 91+ 9798688008 for Jobs
We'll call you back and register your job seeker profile for FREE.


Copyright © VMDM Business Solution 2010 - 2016 VMDM Classified Network | Joint Venture With SIPL Designed and Developed by Vyaparmantra.in